How to pronounce “nozzle” in English

This nozzle vibrates at a high frequency, breaking the stream into tiny droplets.

mm uh nozzle that means your your bead is going to be at least point4 mm um it

So I machined these nozzles, and I built some of the components.

And I had these nozzles hooked up to the bathroom sink.

Some of the nozzles and their location.

You can tell the nozzles on the front and back are a bit bigger and then you've got more of them in that direction.

Expelled through nozzles, steam generated thrust that spun the ball.

actually come out irregular out of the nozzle, but then before they reach the side where they get hit by the laser,

We would put this kind of nozzle on it, and put it directly on the glass We created wine that didn't produce any waste

then the main barrel and then the nozzle tip and the nozzle is what creates the resolution of your printer so if it's A4

extruder is right next to the nozzle um kind of like the one you're passing on this side like the the drive systems

And so I had these nozzles hooked up to the bathroom sink, and I turned and shot a stream of water across the bathroom.

It uses the same inkjet nozzles.

As the gas rushes through the turbine and nozzle, its pressure drops from around 50 atmospheres down to one, and it expands by almost 20 times.

She thumped the refill zone and put her cup under the nozzle.

first um the disadvantage about that is that every nozzle in this type of setup has to be exactly in the exact same

Whereas as soon as you have vectored thrust nozzles and gyros and-- I mean, it's not hard to find examples of where control

and that means if one's printing another of those nozzles might knock over what you're trying to print or vice versa

Billy stood to the side, nozzle aimed at the charred box.

people start coming up with once like the other one which is like one nozzle and they feed three filaments through it

like to be cooled down as soon as they come out of the nozzle um and the reason for pla is that when you cool down it

We have more EV charging plugs in California than we have gasoline nozzles.

To make the droplets, extremely pure tin is melted and pushed through a microscopic nozzle by high pressure nitrogen.

You've got the pressure with which you push out the tin and at the frequency of the nozzle.

One day I was trying to open a bottle of super glue where the cap had gotten glued on to the nozzle, so I tried twisting it off with my teeth,

I have a 3D printer, so I made a little Neti Pot nozzle that goes on a regular bottle.

that um so if you want a higher resolution you got to get a smaller Hole uh for your nozzle um but the important

So at the very last minute, I had to fix one nozzle.

This one has a nozzle on the front, where you can attach either a cheese shredder, a meat grinder, a vegetable

that I was talking to a branding expert uh about down in Cincinnati it was shaped kind of like um a gas nozzle at a

They also have another peculiarity, where they urinate from nozzles in their face to attract mates.

of doing it is the like the top one it's uh there's just four nozzles there and

There are yogurt self-serve emporiums everywhere where you'll find these kinds of taps or nozzles

So all the soda has been sitting out for eight hours with little Coke and Mentos nozzles on top of it.

The tubes supported a metal sphere that spun on its horizontal axis, with two nozzles or tip-jets protruding from it and bent in opposite directions.

gets the joke and he says yeah I'm gonna be her first subject so we walk outside and big Abba nozzles they say goodbye

advantage and disadvantage of the two but the 175 is getting more popular because it's an easier way to drive that filament through the nozzle um and so

And I'm having an image right now of the cake thing when you squeeze the icing, and it's different size nozzle

If there's a bunch of dust on your filament that gets in there, clogs up the nozzle, it doesn't know.

And anyway they put those literally in a blender, and then made an extruder that had a really thick nozzle, like 1/2 an inch.

It's got a little nozzle or a little opening like an inflation valve on a bicycle.

This compressed air is then forced into the combustion chamber, where fuel is sprayed in through a ring of nozzles and ignited.

Custom undercab lighting, a black mirror tile on the floors, clever self-clean nozzles hidden behind deco trim lines.