How to pronounce “machining” in English

But once again, it takes all the complexity out of the process.You don't need to know anything about plastic or machining.You just press a button and, poof, out it comes.

So my strategy was to build a water gun and then be able to demonstrate how it would perform.So I started making, literally machining all the parts.I had a little Unimat place that I could-- in my shop that I made all the components.

- To push the 60% average even higher, the insertion needs to be more targeted.Instead of letting it move, Henson's design supports the cutting edge with tight machining tolerances, holding the blade securely so the angle is consistent.

1,200. A key focus of production is the manufacturing of tools used fordrilling, milling, and machining by both mechanical engineering firms and skilledtrades people. This production area requires a particularly high level of

It was a little bit of trial and error and a little bit of educated guessing, but done on a very basic level.I did all my own welding, a lot of my own machining.I built it in a town called Idabel, Oklahoma.

One long, giant lung and one smaller lung.Long before we took the monorail away, our awesome mechanics were actually machining parts for this thing to keep it going.

I'm just going to show you some of these last few slides that I took while doing these last installs just to give youWell, the tolerances that we operate on are actually very, very sloppy in comparison to modern machining techniques.

She, out of college, I think it was, went into the military to crack codes.At that time, you guys, computer aided design and computer aided manufacturer, computer machining, were just coming on.

So what you have is sort of two semi-hemispherical end cap one with a hatch in it and the opposing one with the viewport in it.And, as you know, a rule of thumb is where we take out, say, five pounds of metal by machining, you sort of puttythat around the opening.

But rather than license it, he decides that he wants to be an entrepreneur.You have access to 3D printers, CNCs, laser cutters, software tools, traditional machining tools, all this kind of stuff.